Do you know the Impact Wrench knowledge?

As an Impact Wrench Manufacturers, share some information with you. A wrench is a commonly used mounting and dismounting tool that is a hand tool that uses a lever principle to twist a bolt, screw, nut, and other threaded opening or socket firmware that holds a bolt or nut. Wrenches are usually made of structural steel of carbon or alloy material. The manual wrench is also called ordinary wrench, which is mainly used in ordinary life work. Its use is relatively simple, mainly divided into single-head wrench, double-head wrench, adjustable wrench, plum wrench, multi-purpose wrench, tap wrench, impact wrench, Torque wrench, torque wrench.

Impact Wrench

Impact Wrench is mainly used for initial bolts. It is very simple to use, just align the bolts with the power switch. The electric torsion shear wrench is mainly a final tight-twist type high-strength bolt. Its use is to align the bolt with the power switch until the torx of the torsion-shear high-strength bolt is broken. The electric torque wrench can be tightened or tightened. It is used to adjust the torque and then tighten the bolts. The electric angle wrench is mainly a type of fixed torque wrench. It is used to adjust the degree of rotation and then tighten the bolt. The electric angle wrench is an electric wrench that is used to tighten the bolts at the corners of the steel frame. It is used in the same way as the electric torsion wrench. High torque accuracy shocks are used in engine and tire repair.

The high-pressure gas (generally 6.2Kgf) drives the air motor mechanism to rotate, and then outputs the rotor to the striking mechanism. The striking mechanism drives the striking shaft to form a reciprocating front and rear and rotational motion.

Ordinary pneumatic wrenches are all impact type, also called strike type, because it is composed of strike group, motor unit, fuselage, switch group and so on. The hammer block of the strike group is driven by the connection of the motor group, and the main shaft is continuously struck to generate the torsion force of the source, so it is also called impact wrench. The Impact wrench is suitable for ordinary bolts. The fixed torque wrench is suitable for the initial and final tightening of high-strength bolts (continental angle type); the torsional shear wrench is suitable for the final tightening of high-strength bolts (plum-shaped).

Impact wrench has a high efficiency and generally has more than 1000 impacts per minute. The high-strength bolts of the plum-type type can be tightened with an electric wrench or an impact wrench. In general, the construction process of the Continental-angle high-strength bolt requires a high precision of the initial tightening torque, and requires a torque wrench for the construction of the corresponding torque. .

It is undeniable that because the environment of the operation is constantly changing, any industrial tool will have various faults in the course of the operation, and the wrench will also have problems in the work. If such a fault occurs, it will affect the work. effectiveness. Therefore, the analysis of the formation of the wrench fault, and then find out the cause of the fault, and then carry out the corresponding repair will solve the fault, but also prevent the fault to a certain extent. Our company also has Tow Rope for sale, welcome to consult.