What Should You Pay Attention To When Using Hydraulic Jacks?

As a Transmission Jacks Supplier, we have the following recommendations for the use of hydraulic jacks.

1. If there is a blanking phenomenon during use, first loosen the oil drain screw on the pump body, and then open the pump body vertically and turn it down a few times, then tighten the oil drain screw to continue using.

2. When using, do not add eccentric load or overload, so as to avoid the danger of hydraulic jack damage. When there is load, it is forbidden to remove the quick connector to avoid accidents and damage to the machine.

3. This machine uses oil as the medium. The maintenance work of oil and hydraulic jacks must be done to avoid fouling or oil leakage and affect the use effect.

4. New or long-term hydraulic jacks, because there is more air in the cylinder, when the piston is used, the piston rod may have a slight jump phenomenon. The super-high pressure hydraulic jack can be reciprocated 2-3 times without load to eliminate. The air inside the cavity. For long-term idle hydraulic jacks, the seals are hardened due to the long-term non-operation of the seals, thus affecting the service life of the super-high pressure hydraulic jacks. Therefore, when the hydraulic jacks are not in use, the airborne reciprocating motions are 2-3 times per month.

If you would like more information about Hydraulic Jacks Quote, please contact us.