How to repair tubeless punctured tyre?(2)

I will continue to tell you how to repair tubeless punctured tyre. Have you prepared your tire tools including tire repair tools and tire changer tools? Let’s go on.

5 – Once you find that the seal strip is equal on both the sides of the inserting tool, take out the tube of rubber cement and apply it to the centre of the seal strip. As the inserting tool has a little gap at the bottom it allows the seal to be left behind inside the tyre.

6 – Now it is time to remove the spiral tool from the tyre and insert the inserting tool with the seal strip. Keep in mind that the inserting tool will not go completely inside. It will stop after its plastic bit of the handle touches the tyre, after this, it can be pulled out. At this point, the seal will be left inside the tyre blocking the hole in the tyre.

7 – The sharp blade or knife now must be used to cut off the extended/extra ends of the seal strip sticking out of the tyre for an even contact patch for the tyre.

8 – Finally, fill the tyre with appropriate pressure. And, you are all set to pursue your journey ahead…!

We provide tire tools for you.