Car rainy maintenance tips

After the storm, the weather tends to be more hot and the sun is more sinister. After more rain and strong sunlight the aging of car paint and parts will be accelerating, you should do regular routine maintenance. Here I will introduce several summer rainy season car maintenance methods.

1. Cleaned

Encountered heavy rain, the car should be returned promptly for cleaning, or can lead to the gap at the side of the vehicle under the accumulation of sludge, which is moisture to hiding places, but also the most likely to lead to rust place.

2. Paint protection

Acid rain components on the car paint has a strong corrosive effect over time will cause damage to the car paint, so the rainy season, it is best to give the car to conduct a paint repair capacity. The simplest is waxing, longer and more effective closure of the glaze is tolerance. Whatever the method, gave the car wearing an invisible cloak of protection, to prevent paint fade aging, often accompanied by capacity to make beautiful car around.

3. Chassis care

The chassis is the ground and the closest site, subject to road conditions particularly serious, generally the easiest part of rust stains, even at the wheel housing may be loose perforation. Therefore, we must pay attention to clean the car chassis rust treatment, do a chassis rust treatment, rust effect can be kept for 3 months. Care must pay attention not rust finish with an alkaline cleaning solution rinse body and chassis, it will affect the rust and rust shorten the time.

4. Start ignition

Rain, owners often encounter difficult to start the engine problems, sometimes even if we manage to start up, but also weakly. Such illnesses most likely by the ignition system leakage due to moisture generated. Furthermore, it may be one to rain the weather cools, and enclosed in a hot air distribution boards is likely to condense into water droplets caused by distribution boards inside a small flood that destroys the normal ignition function.

Once because of damp caused by the ignition system misfire, engine performance degradation, it is best to use a dry paper towel or dry cloth to distribution boards and wires and other internal and external dry, then spray cans with desiccant desiccant spray in the distributor cap, battery connector, spark plugs, ignition coil and high voltage, etc., and so after a while you can start the engine up.

5. In addition to water brake

The vast majority of car brake system is a dual hydraulic brake booster vacuum pipe, worthy of attention is, to pass the braking force brake fluid is extremely absorbent. If water into the brake fluid in the braking process, the high temperature generated by friction causes the water vaporizer. The gas is compressible, the brake fluid is compressed, it will cause brake failure or even failure. Rain for a long time, the air humidity will increase, if the brake fluid before the rainy season there is a small amount of water, it would be very dangerous. Some of the more serious brake fluid absorbent vehicle, the brake fluid can see the drops of the oil cup lid. Therefore, when maintenance must check the brake fluid in order to ensure the safety of the occupants.

Our company as one of the biggest auto tools manufacturer, we provide auto detailing tools, air duster gun, engine washing gun, spray and foam gun, etc. If you have any question, please consult us at your time.